Paper Packaging and Polyfilms Instruments

Approx. Rs 65,000 / PieceGet Latest Price

Product Details:

Digital Crush Tester
The Crush Tester is suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics. The special sample holders extend the instrument’s possibilities. The accuracy is achieved with a precision load cell, which is even accurate at low force values.

TECHNICAL SPECIFICATION
Capacity :1000kgf
Platen Size : 125 × 125 mm
Accuracy : ± 1% of full scale 
Resolution : 0.1
kgf Weight : 125 kg (approx.)
Power Supply : 440VAC, 50Hz

Approx. Rs 65,000 / PieceGet Latest Price

Product Details:

Heavy duty load cell mounted under the Upper platform measures the direct force on the pouch. Suitable for testing the Seal Integrity of Liquid / Gas Filled - Pouches / Saches / Blisterpacks. Suitable for 3 ml – 1,500 ml or larger packs Peak hold facility for noted of maximum reading of pouch brust.

Specifications: 

Capacity - 500kgf
Least Count - 0.1kgf
Accuracy - 0.01 kgf
Digital model with load cell based system 

Approx. Rs 55,000 / PieceGet Latest Price

Product Details:

Scuff resistance tester is used to determine the rub resistance between two printed material. Also, it can be used to evaluate the transfer of colour from printed surfaces. Good print quality is directly proportional to rub resistance. So, this equipment effectively analyze the print quality of various materials. Related standard ASTM F2497-05.

Technical Specifications :-

Digital counter: 4 digits with least count of 1. Rotational speed: 60 RPM.
Test weight: 2Psi (Other on customer request).
Diameter of Upper clamp: 48±2mm. Diameter of lower clamp: 120±2mm. Accessories: Two nos. of templates as per both clamps.
Power: 220 Volts AC, 50Hz, single phase

Approx. Rs 60,000 / PieceGet Latest Price

Product Details:

With our in-depth knowledge of this domain, we are actively engaged in offering an excellent quality assortment of This machine  

Approx. Rs 3,000 / PieceGet Latest Price

Product Details:

To Find Out the GSM (Grams per square meter) of any fabric, Films, Paper and rubber.
Diameter of Specimen : 113 mm
Area of Specimen : 100 cm2
With Four imported Blade & Two GSM Pad

Special feature
1)100% Aluminum alloy material lighter in weight
2) Instead of spring loaded we are using SS bush for zero maintenance

As per Standard ASTM D 3776, ISO 3801

Approx. Rs 80,000 / PieceGet Latest Price

Product Details:

Drop Tester(motorized) is used to examine the structural integrity of a product. Drop tests usuallyinvolve an object being dropped from a predefined height onto surface.
RELATIVE STANDARD: IS 7028.
Technical Specifications :-
Maximum drop height- 1600mm (other on customer request).Minimum drop height- 500mm (other on customer request).Sample holding platform size- 450X450mm (other on customer request).Maximum sample weight- 50Kg (other on customer request).Base platform size- 700X700mm (other on customer request).Motorized system for UP-DOWN of sample holding platform.Pneumatic dropping system (manual is optional).Angular drop system is also available on request.Power supply: 220 volts AC, single phase 50Hz.   

Approx. Rs 2 Lakh / PieceGet Latest Price

Product Details:

Box compression tester is used to measure the compression strength of the corrugated box. Thecarton or box compression tester is useful to test the strength of box to bear any type of real timepressure that it would face when it would carry goods in it. It is examined by placing carton on flatplatform & pressing it through motorized system.
Related Standard ASTM D4169, ASTM D642, ISO 12048.
Technical Specifications :-
Capacity: 1000Kgf (Other on request up to 5000Kgf).Accuracy: ±0.5%.Platform Size: 1000 x 1000mm. (other on request)Maximum box height can be tested: 1000mm.Variable speed AC driveTest speed: 12.5±2.5mm per minutePower Supply: 220 Volts AV, Single phase 50Hz. 

Approx. Rs 40,000 / PieceGet Latest Price

Product Details:

Dart Impact Tester is used to determine the impact of load on a plastic film under specific conditions to analyze the effect of a free-falling dart. It is widely used in plastic film industries for judging the strength and stability of the plastic films and similar products.-
Related standard ASTM D1709-16A.

Technical SpecificationsThe machine is equipped with a clamp having 127mm diameter from inside
Heights of fall can be set on the scale 660mm & 1524 mm (adjustable as per standard).
Diameter of dart head: A- 38mm & B- 50.8mm ± 0.13mm.
Dart weight: 50 grams to 900 grams with incremental weights of 5 grams.
It is equipped with a digital counter & in-built vacuum pump.
Electromagnetic dart release mechanism.
Power: 220 Volts AC, Single Phase 50Hz. 

Approx. Rs 50,000 / PieceGet Latest Price

Product Details:

Co-efficient of Friction Tester is primarily used to determine the coefficient of starting and slidingfriction of fabrics, plastic films, sheets, paper etc. It measures the static and kinetic friction of thetest sample, when it slides over itself or other substances in a specified test condition
Standard: ASTM D 1894
Technical Specifications :-Capacity: Up to 1.00 kg/9.8N (other on customer request).Least count: 0.001Kg/0.01N.Direct display: Static and kinetic friction values.Speed: 150mm/minute.Weight of sled: 200 grams.Power: 230 Volts, 50Hz, single phase 

Approx. Rs 80,000 / PieceGet Latest Price

Product Details:

Vacuum tester for empty bottles is used to examine the strength of empty bottle, most criticalfactor in designing bottle for hot fill applications
Technical Specifications :-
Range: 0-7 bar (other on customer request).Digital vacuum gauge.Accuracy: ± 0.05%.Peak hold locking.Units available in Bar/PSI.Bottle neck size: 28mm PCO neck (other on customer request).

Approx. Rs 50,000 / PieceGet Latest Price

Product Details:

Heat Sealer is used to perform sealing on flexible packaging films and other thermoplasticmaterials using specific pressure, dwell time & maintaining temperatures
Related standard ASTM F 2029.
Technical Specifications :-
Sealing temperature range: 0-250° Celsius.Accuracy: 0.5° Celsius (PID controlled).Least count: 0.1° Celsius.Sensor: Pt-100 RTD.Sealing area: 250X15mm (other on request).Sealing jaw material: Aluminium.Timer: Digital 4 digit with range 0.1 to 99.9 seconds.Sealing pressure: 2 to 6 Bar.Power supply: 220 Volts, 50Hz Single phase. 

Approx. Rs 14,500 / PieceGet Latest Price

Product Details:

Cobb sizing tester determines the amount of water or any liquid absorbed by the paper, corrugatedfibreboard, and paperboard in a given period of time under standardized conditions. The cobbvalue is defined as the mass of water absorbed in a specific time by a 1 sq. meter sample of paperor corrugated board. The high Cobb value of the papers and cardboards indicates the ability of thematerials to retain or absorb the moisture.
RELATIVE STANDARD: ASTM D3285.
Technical Specifications :-Sample diameter- 130mmRoller weight- 10 KgCylinder depth- 60mmWater dispensing unit & roller construction material- High grade stainless steelMeasuring cylinder for pouring 100ml of water for test.

Approx. Rs 55,000 / PieceGet Latest Price

Product Details:

Puncher Resistance Tester Puncture resistance tester is used to determine the resistance of paper, paper board & similar product. Various packaging materials and boxes are prone to damage by puncture during transfers and handling. So, durability of packaging material can be analyzed by the parameter of puncture resistance. This equipment tests various material like paper, boards to determine the resistance to puncture

Related Standard ASTM D781.

Technical Specifications :-
Energy range of weights: 6, 12 & 24 Joules per meter
Accuracy: ±1% of full range.
Release angle of pendulum: 90º.
Pendulum release mechanism:
Manual Power supply: 220 Volts AC, Single phase 50 Hz